Noob to NoS with Bandit 1200

Noswizard · **Posted:** Wed Mar 17, 2010 3:40 am

Give Ant a call, he'll sort it for you. :idea:

jezza · **Joined:** Sun Nov 22, 2009 7:35 pm **Posts:** 61

ok will do at the weekend.

jezza · **Joined:** Sun Nov 22, 2009 7:35 pm **Posts:** 61

right been ill for a while so have not done much , anyhow started the static tests , got the gas flowing through the pulsoid and got the fuel flowing through the pulsoid to the carb vacuum intake........just a quick quistion , with the fuel flow I notice it varies a tad on the way the bike is stood on the ground whether its leaning slighly one way or another , is this because its vacuum fed and once the bike is running it should draw it through more freely or is it a problem that needs sorting before i go any further . oh upright on level ground is fine.

Noswizard · **Posted:** Sun Jul 25, 2010 11:39 am

Unless you're using nitrous on a circuit rather than a Drag strip, that wouldn't be a problem and yes the vac will affect the fuel and prevent this anyway.

jezza · **Joined:** Sun Nov 22, 2009 7:35 pm **Posts:** 61

thats exactly what i thought just wanted confirmation .
thanks again.

Noswizard · **Posted:** Sun Jul 25, 2010 12:44 pm

jezza · **Joined:** Sun Nov 22, 2009 7:35 pm **Posts:** 61

Been a while , alls going well .
Just a quick question as I've got my christmas bonus to blow, I want a 2nd 20z bottle mounted to my bike on the other side .
Is this just a case of buying a 4mm "t" or "y" piece , pipe, olives and nuts and connecting both bottles to the "T" then onto the pulsoid.... also would you have just one bottle valve open or both bottles open at the same time .... would it affect pressure ?

Cheers

Jezza

Noswizard · **Posted:** Sat Dec 17, 2011 2:10 am

jezza wrote:

Been a while , alls going well.
Good to hear from you again Jezza.

Just a quick question as I've got my christmas bonus to blow, I want a 2nd 20z bottle mounted to my bike on the other side .
Is this just a case of buying a 4mm "t" or "y" piece , pipe, olives and nuts and connecting both bottles to the "T" then onto the pulsoid....
Yes

also would you have just one bottle valve open or both bottles open at the same time .... would it affect pressure ?
Having both open at the same time would deliver a more consistent pressure but you can use it either way.

jezza · **Joined:** Sun Nov 22, 2009 7:35 pm **Posts:** 61

Thanks for your quick reply Trevor, Has the Christmas discount code online expired as it does not seem to be accepting it . No problem if it has , as I will still be placing the order this side of Christmas.

Many thanks again for your (as always ) prompt reply.

Jezza

Noswizard · **Posted:** Sat Dec 17, 2011 2:20 pm

jezza wrote:

Thanks for your quick reply Trevor, Has the Christmas discount code online expired as it does not seem to be accepting it . No problem if it has , as I will still be placing the order this side of Christmas.

Many thanks again for your (as always ) prompt reply.

Jezza

No it hasn't expired (must be a cock up that needs looking at) but we're about to make an even better offer for the last few days, so watch out for that instead.

jezza · **Joined:** Sun Nov 22, 2009 7:35 pm **Posts:** 61

Noswizard wrote:

jezza wrote:

Thanks for your quick reply Trevor, Has the Christmas discount code online expired as it does not seem to be accepting it . No problem if it has , as I will still be placing the order this side of Christmas.

Many thanks again for your (as always ) prompt reply.

Jezza

No it hasn't expired (must be a cock up that needs looking at) but we're about to make an even better offer for the last few days, so watch out for that instead.

cheers for that , as I may add a couple of bottle warmers to the order (funds allowing/ mrs not finding out)

Noswizard · **Posted:** Sun Dec 18, 2011 12:29 pm

jezza wrote:

Noswizard wrote:

jezza wrote:

Thanks for your quick reply Trevor, Has the Christmas discount code online expired as it does not seem to be accepting it . No problem if it has , as I will still be placing the order this side of Christmas.

Many thanks again for your (as always ) prompt reply.

Jezza

No it hasn't expired (must be a cock up that needs looking at) but we're about to make an even better offer for the last few days, so watch out for that instead.

cheers for that , as I may add a couple of bottle warmers to the order (funds allowing/ mrs not finding out)

LOL

jezza · **Joined:** Sun Nov 22, 2009 7:35 pm **Posts:** 61

all bits ordered , got the code to work

ordered the bottle heaters, extra 20 oz bottle,brackets etc .

just hope the postman delivers under the cover of darkness and the mrs don't see him coming up the path.

neiljewell · **Posted:** Fri Dec 23, 2011 9:14 pm

good to see another bandit 12 with WON out there!!

p.s. them bottles won't be big enough!!!!

jezza · **Joined:** Sun Nov 22, 2009 7:35 pm **Posts:** 61

neiljewell wrote:

p.s. them bottles won't be big enough!!!!

tell me about it , nearly 80 mile round trip to gas up as well .

may have too look at buying a large full bottle and have a go at filling myself.

jezza · **Joined:** Sun Nov 22, 2009 7:35 pm **Posts:** 61

Brilliant service ordered items beginning of the week and they arrived thursday , there was a part of the order missing so I contacted wizards that night , item was dispatched Friday and arrived today (Saturday) . I was not expecting it until after Christmas.
Many thanks for the excellent service. :clap2:

Cheers to wizards for all there help throughout the project.
I'd like to wish you all at WON a very merry Christmas and prosperous new year.

on a different note the courier left the first parcel in the recycling bin outside the house, luckily my eldest got to it before the binmen did.

Noswizard · **Posted:** Tue Dec 27, 2011 1:55 am

jezza wrote:

Brilliant service ordered items beginning of the week and they arrived thursday , there was a part of the order missing so I contacted wizards that night , item was dispatched Friday and arrived today (Saturday) . I was not expecting it until after Christmas.
Many thanks for the excellent service. :clap2:

All I can say is sorry for the original error but we certainly do our best to put any such issues right ASAP, so I'm pleased that work out as it should in this case.

Cheers to wizards for all there help throughout the project.
I'd like to wish you all at WON a very merry Christmas and prosperous new year.

Many thanks and the same to you.

on a different note the courier left the first parcel in the recycling bin outside the house, luckily my eldest got to it before the binmen did.

I guess you just have to think yourself lucky it wasn't something delicate and they didn't throw it over a fence on to your drive, as happened to someone in the US recently.

jezza · **Joined:** Sun Nov 22, 2009 7:35 pm **Posts:** 61

I've just purchased a..... ahem *cough, cough* (it was very cheap ,20 quid ) 11 lb nytr*x bottle which I'm hoping to use to fill and decant into my smaller 20oz bottles.

would I be able to use a -4an to 4mm female - female (I think its this size , maybe someone could confirm this size is right) adapter on the ny*rex bottle to decant using my won fittings , also is it possible to change the valve to a won valve as I'm not entirely happy having a blow off valve set up on this bottle and the possibility of losing all my Gas.

Edit*** looking at the outlet it may be -an6

pics are clicky thumbnail thingys

Noswizard · **Posted:** Mon Jan 23, 2012 1:12 am

jezza wrote:

I've just purchased a..... ahem *cough, cough* (it was very cheap ,20 quid ) 11 lb nytr*x bottle which I'm hoping to use to fill and decant into my smaller 20oz bottles.
That's all they are good for, as they'd perform badly fitted to a vehicle due to the coating.

would I be able to use a -4an to 4mm female - female (I think its this size , maybe someone could confirm this size is right) adapter on the ny*rex bottle to decant using my won fittings,
We offer adaptors for that and also to 5mm but you'll need to check which yours is first.

also is it possible to change the valve to a won valve as I'm not entirely happy having a blow off valve set up on this bottle and the possibility of losing all my Gas.
Yes that's possible and we MAY even be able to just do you an adaptor to replace the rupture disc with an SPRV, so if you want to post the rupture disc components up to me, I'll see what we can do.

Edit*** looking at the outlet it may be -an6
It looks to be under 1/2" across the threads, so it's 4 AN

jezza · **Joined:** Sun Nov 22, 2009 7:35 pm **Posts:** 61

once again thank you for your prompt response

NITROUS OXIDE ( nos / n2o ) advice forum

Noob to NoS with Bandit 1200

Who is online